Set of spacers (6) and adapters to fit the F80 M4 lower control arms on your 1, 2, 3, or 4 Series.
4 spacers for the control arms
2 spacers because the F80 control arms are narrower at the chassis mounting point; without these spacers, you’ll bend the chassis brackets when installing the control arms.
With this set of control arms, your wheels will be positioned slightly further outward, and you’ll add some camber and caster. This provides more grip, better alignment for sporty driving (more camber), and a bit more feedback through the steering wheel thanks to the use of harder rubber and ball bearings.
: Please note! F2x and F3x control arms have different lengths on the left and right, while F8x control arms are the same length on both sides. Therefore, with this set, your car will have different camber on the left and right. (See our MRT articles or our uniball control arms for a geometrically correct setup)
With this set, a stock suspension goes from 1.15 degrees of camber to 2.0 degrees. Ideal for sporty street driving and better than stock for your track days.
After installation, the car must always be aligned.
Please contact us for installation; if not in stock, it’s usually available quickly.
Heb je het artikel niet gevonden of heb je vragen? Neem gerust contact met ons op!
App ons direct via WhatsApp!
Stuur een berichtje naar 06‑30169408 en ontvang snel een persoonlijk antwoord.
WhatsApp is handig en snel, en je kunt eenvoudig foto’s of bestanden meesturen.
Geen wachttijd, gewoon direct contact.
We helpen je graag verder!
