Set of 4x 14.9 high tensile strength studs with nuts and washers and 5ml blue loctite 243. Replace the bolts that hold your diff to the subframe for these studs.
The diff is easy to install because instead of holding the diff against the subframe and then feeling where the bolt should go in the hole (Blind), you can now aim the diff in the subframe and then just put the nuts on it need to rotate.
This set is suitable for the subframe reinforcement sets.
Installation preferably when the diff is out from under the car, (Or if we are overhauling it for you, we can install the set for you)
- Loctite on studs (differential side only)
- With Allen 6 screw the studs into the differential, leave at least 5 to 6 turns or up to 22mm protruding from the differential.
- Align the diff through the subframe, washers over the studs and tighten the nuts well
Heb je het artikel niet gevonden of heb je vragen? Neem gerust contact met ons op!
App ons direct via WhatsApp!
Stuur een berichtje naar 06‑30169408 en ontvang snel een persoonlijk antwoord.
WhatsApp is handig en snel, en je kunt eenvoudig foto’s of bestanden meesturen.
Geen wachttijd, gewoon direct contact.
We helpen je graag verder!
